EPC Engineering Division // Lines & Equipment
EN | DE | 中文
HOME / PRODUCTION LINES & EQUIPMENT

Turnkey Casting Lines &
Equipment Specification Catalog

Explore our certified lineup of complete automated foundry systems, precision EPS pattern machinery, pneumatic maturation silos, and continuous sand regeneration plants. Built to deliver zero-defect castings with predictable cycle times.

CASTING DISCIPLINES LFC • V-Process • Shell
LINE SCALABILITY 5,000 to 30,000 TPY
CONTROL STANDARD Siemens S7-1500 PLC
DELIVERY MODEL Turnkey EPC Warranted
Need a Custom Sized Plant? Use Configurator →
Automated Lost Foam Casting Production Line
Full Turnkey System
CAP: 30,000 TPY

Automated Lost Foam Casting (LFC) Production Line

Turnkey automated line featuring cluster drying, 3D multi-frequency sand compaction table, automatic flask negative pressure docking, and centralized sand regeneration.

Max Flask Size: 2800 × 2000 × 1500 mm
Vibration Modes: X-Y-Z Independent 3D
Negative Pressure: -0.05 ~ -0.07 MPa
Get Quote
Horizontal Pattern Molding Machine
Pattern Molding
120T CLAMP

Horizontal EPS Pattern Molding Machine

Precision hydraulic horizontal molding unit for complex engine blocks and cylinder head patterns. Equipped with Japanese steam balance valves and fast mold cooling.

Platen Size: 1600 × 1200 mm
Molding Cycle: 45 - 75 Seconds
Steam Pressure: 0.6 - 0.8 MPa
Get Quote
EPS Copolymer Block Molding Machine
Block Molding
HIGH VACUUM

Copolymer Large Foam Block Molding Machine

Engineered for STMMA / EPS / PMMA copolymer pattern blocks used in large structural castings. High vacuum condensing system ensures moisture content under 1.5%.

Block Dimension: Up to 4000 × 1250 × 630 mm
Density Uniformity: < ±1.2% Variation
Cooling Method: Multi-point Vacuum De-air
STMMA / EPS Compatible Get Quote
Automated Maturation Silo System
Silo Logistics
PNEUMATIC

Automated Bead Maturation Silo System

Centralized storage and aging silo cluster. Incorporates anti-static breathable liners, automated air blowing, and proportional pipe switching to molding stations.

Silo Capacity: 20 - 100 m³ / Cell
Aging Circulation: Automatic 4-8 Hour Timer
Conveying Medium: Low-velocity Pneumatic
Automated Dosing Get Quote
V-Process Casting Line
V-Process
NO RESIN

V-Process Automated Turnkey Production Line

Binder-free vacuum sealing casting line. Films thermoform tightly against the pattern while dry sand is compacted by vacuum negative pressure. Exceptional surface finish.

Surface Roughness: Ra 3.2 - 6.3 µm
Sand Recovery Rate: > 98.5%
Applicable Castings: Counterweights & Heavy Beds
Zero Chemical Binder Get Quote
Central Vacuum Station
Auxiliary Vacuum
-0.085 MPa

Central Vacuum Negative Pressure Station

Multi-pump liquid ring vacuum array with dual surge buffer tanks and electronic proportional regulation. Maintains stable mold negative pressure during high-temp pouring.

Pumping Speed: 60 - 200 m³ / min
Surge Tank Volume: 10 - 30 m³ Dual Buffer
Pressure Tolerance: ±0.002 MPa Stability
Multi-LFC Line Support Get Quote
Bottom Discharge Pre-Foaming Machine
Pre-Expander
±0.3 g/L TOLERANCE

Continuous Bottom-Discharge Pre-Foamer

Precision batch pre-expander featuring electronic weighing, steam proportional ramp-up, and fluidized bed drying to produce perfect uniform beads without clumping.

Foaming Density: 16 - 32 g/L
Hourly Throughput: 300 - 800 kg/h
Steam System: Spirax Sarco Valve
Get Quote
Top-Mounted Heat Pump Air Dryer
Coating Drying
HEAT PUMP 65% SAVING

Top-Mounted Heat-Pump Pattern Dryer

Dehumidifies and cures refractory ceramic paint on foam clusters without thermal deformation. High-velocity laminar airflow cuts cluster drying time to 2-3 hours.

Drying Chamber Temp: 40 - 52 °C Constant
Chamber Humidity: < 20% RH
Energy Source: Air-Source Heat Pump
Low Deformation Get Quote
Lift Type Refractory Paint Mixer
Paint Preparation
PNEUMATIC LIFT

Lift-Type Refractory Paint Mixer

Dual-speed high-shear dispersion mixer for preparing lost foam alcohol-based and water-based zircon coatings. Prevents settling and bubbles in dipping tanks.

Tank Capacity: 300 - 1,000 Liters
Rotation Speed: 0 - 1,450 RPM Inverter
Tank Material: SUS304 Stainless
High-Shear Dispersion Get Quote
Vertical Pattern Molding Machine
Vertical Press
RAPID TOOLING

Vertical Precision Foam Molding Machine

Vertical clamping machine with ergonomic low-level pattern ejection. Ideal for valve bodies, pipe fittings, and small engine components with quick mold changeover.

Platen Size: 1000 × 800 mm
Clamping Force: 600 kN Hydraulic
Mold Change Time: < 20 Minutes
Quick Change System Get Quote
Technical Manufacturing Sequence

The Automated Foundry Lifecycle

A synchronized closed-loop sequence engineered to eliminate labor bottlenecks, reduce metallurgical defects, and guarantee consistent cycle times.

01

Pre-Expansion & Aging

Raw EPS/STMMA resin beads are expanded with controlled steam to specified density (18-24 g/L), dried in fluidized beds, and aged in breathable silos.

02

Pattern Molding & Assembly

Automatic molding machines produce pattern sections. Robotic hot-melt or cold-glue fixtures assemble complex multi-cavity clusters with gating runners.

03

Coating Dipping & Dehumidification

Clusters are dipped into refractory ceramic slurry to ensure molten metal isolation, then transferred into heat-pump drying tunnels to cure without distortion.

04

Flask Sand Filling & 3D Compaction

Dry unbonded silica sand fills around the pattern in vacuum-equipped flasks. Tri-axial vibration tables compact sand into all intricate pattern recesses.

05

Vacuum Pouring & Evaporation

Molten metal is poured under -0.05 MPa negative pressure. Liquid metal instantly vaporizes the foam pattern and replicates the cavity with micrometer precision.

06

Shakeout & Sand Regeneration

Flasks overturn onto automated vibrating grids. Dry sand flows to magnetic separators, multi-stage fluidized coolers, and back to silos for 98.5% reuse.

Interactive Plant Estimator

Calculate Your Preliminary Foundry Line Specs

Select your target capacity, casting material, and process. Our engineering model calculates suggested flask sizes, sand circulation flow rates, and building footprint.

Input Production Parameters

Live Calculated Preliminary Spec EPC REV 2.4
Recommended Flask Dimensions: 1600 × 1200 × 1000 mm
Sand Circulation Capacity: 36 t/h
Estimated Flask Cycle Time: 68s / box
Recommended Bay Footprint: 1,800 m² (60m × 30m)
*Preliminary sizing based on empirical data from over 120 commissioned turnkey foundry lines. Final layout will be customized to your soil load bearing, crane hook height, and electrical substation capacities.
Includes full technical brochure and preliminary budgetary BOM in PDF format.